Using The Ir Transmitter - Kramer VS-3232DN User Manual

# Feature
26 IN 17~32 Connectors
27 TEST Module
28 RESOLUTION DIP-switches
29 RS-232 9-pin D-sub Port
30 NET Ethernet RJ-45 Connector
31 OUT 1~16
Connectors
32 OUT 17~32
Connectors
33 PATTERN Button
34 Test Module DVI Molex 24-pin
Video Connector
3.2

Using the IR Transmitter

You can use the RC-IR3 IR transmitter to control the machine via the built-in IR
receiver on the front panel.
VS-3232DN – Overview
Function
Connect to the relevant video sources, depending on the cards
installed (17 to 32, see
Signal generator module for testing video outputs (see
Section
Set the resolution for video generated by the Test module (see
Section
Connects to the remote operation PC or remote controller (see
Section
Connect to a PC or controller via the Ethernet LAN (see
Section
LINK LED flashes when communication is active. POWER LED
lights when the interface receives power.
Connect to the relevant video acceptors, depending on the
cards installed (1 to 16, see
OUTPUTS
Connect to the relevant video acceptors, depending on the
cards installed (17 to 32, see
Press the button repeatedly to change the video pattern
generated by the Test module (see
Connect to one of the relevant video inputs/outputs to aid in
troubleshooting (see
Section
9)
9.2)
5.2).
5.3).
Section
Section
Section 11)
5)
5)
5)
Section 9.3)
11