Using The Config Menu - Kramer VS-3232DN User Manual

8.1.6 Setup Menu—6: recall setup XX, Recalling a Preset
This option recalls a stored configuration from a preset (1 to 59).
To recall a stored configuration:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 6 (RCL) on the numeric keypad (see
The following is displayed:
recall <= __
3. Using the numeric keys, enter the preset (in this example, 02) to recall.
The following is displayed:
Wait .....
After a few seconds, the following is displayed on the right hand side:
CONFIRM
RECALL <= 02
The TAKE button flashes.
4. Press TAKE.
The preset is recalled.
The display reverts to the output/input display.
8.2

Using the Config Menu

The Config Menu provides access to configuration settings that are not regularly
changed and comprises the following options:
•
Input signal detection
•
Input port parameter setting (see
•
Output load detection (
•
Output port parameter setting (see
•
Interface configuration (
•
Interface Reply configuration (
VS-3232DN - Using the Configuration Menus
(Section 8.2.1 )
Section 8.2.2
Section 8.2.3 )
Section 8.2.4
Section 8.2.5 )
Section 8.2.6)
Figure 1).
)
)
31