Configurations And Options - Comtech EF Data DMD-2050E Installation And Operation Manual

DMD2050E Universal Product Modem
1.3

Configurations and Options

The DMD2050E has several configuration possibilities:
Factory - Install features and options at the factory when the unit is manufactured
On site – Using approved procedures, authorized personnel install hardware options on site
Service center - Send a unit to a Comtech EF Data service center for option installation
Feature upgrades - Operators install software options on site using an access code entered
at the front panel
Contact Comtech EF Data for information about available options and feature upgrades.
IMPORTANT
Only authorized service personnel must handle and install hardware options.
The options for the DMD2050E include:
Chassis Options
Standard front Panel with Power Switch on Front
Standard front Panel with Power Switch in Rear
Standard front Panel with Power Switch on Front with Simple Key Loader
Standard front Panel with Power Switch in Rear with Simple Key Loader
Primary Power Options
100-240 VAC
48 VDC
TX IF Connectors Options
50 Ohm TNC
50 Ohm BNC
75 Ohm BNC
CnC Hardware
MN-DMD2050E Revision 2
Introduction
Soft Options
L-Band
Expanded Dynamic Range
TPC FEC
Sequencial FEC
LDPC FEC
CnC CnC Ranges
64k-512k
64k-1000k
64k-2500k
64k-5000k
64k-10M
64k-15M
64k-20M
64k-25M
64k-30M
64k-40M
64k-52M
1– 6