Figure J-6 - Initial Setup Dmd2050E, Demodulator Ita - Comtech EF Data DMD-2050E Installation And Operation Manual

DMD2050E Universal Satellite Modem
At this point verify that both serial traffic and Ethernet traffic is properly passing through the
system.
Enable and setup the ITA function of the modems as shown in Table J-3, once the ITA Option
has been enabled the ITA waveform masks
MN-DMD2050E Revision 2

Figure J-6 - Initial Setup DMD2050E, Demodulator ITA

ITA Operation
J–10