Table of Contents
Advertisement
D.1 Introduction
The web interface lets Radyne products connect and communicate through the Ethernet port.
The connection is a 10Base-T Ethernet connection.
You use the web interface to control and monitor the parameters and functions of these
connected units.
To find out if the unit has the Web interface, use the front panel <SYSTEM> control screen and
make sure that you can see the WEB submenu. If you do not see the WEB submenu, contact
customer service for help.
See also:
Radyne Remote Operations
D.2
Setup
D.2.1 TCP-IP Menus
IMPORTANT
Before you use the web interface, make sure that the TCP-IP menus are set up
correctly.
See also:
Appendix F, TCP-IP Ethernet Setup
MN-DMD2050E Revision 2
Appendix D. Web Interface
, part number MN-DMDREMOTEOP
Setup Guide
D–1
Advertisement
Table of Contents
Troubleshooting
