DMD2050E Universal Satellite Modem
Under Modulator:
Under Modulator:
Under Interface:
Under Modulator:
Under Demodulator:
MN-DMD2050E Revision 2
Under Tx D&I:
Set Drop Mode = T1-D4
Use SATCh TS edit capability to define desired mapping of
Satellite Channels to drop Terrestrial Slots
Use Map Copy to copy Tx Edit to Tx Active
Under Mod Data:
Set Data Rate = 512000
Set Conv Enc = 3/4 Rate VIT
Set Network Spec. = Drop and Insert
Under TX Setup:
Set Tx Type according to your hardware configuration (example: G703BT1B8ZS)
Set Tx Clock = SCTE
Under Tx D&I:
Set Drop Mode = T1-D4
Use SATCh TS edit capability to define desired mapping of
Satellite Channels to drop Terrestrial Slots
Use Map Copy to copy Tx Edit to Tx Active
Under Mod IF:
Set Frequency to desired value
Turn IF Output Power On
Under Demod Data:
Set Data Rate = 512000
Efficient Drop and Insert
E–14
Need help?
Do you have a question about the DMD-2050E and is the answer not in the manual?
Questions and answers