Table of Contents
Advertisement
DMD2050E Universal Satellite Modem
H.1.6 Packet Statistics
The following statistics are available under the Monitor Menu when the Ethernet Data Interface is
selected.
Total Packets
Error Packets
Packet Error Rate
Packet Statistics Reset
Link Status
Port 1 Status
Port 2 Status
Port 3 Status
WAN Status
For each of the above-listed ports, the status may take on one of the following values/meanings.
Down
Unresolved
10 Mbps Half
10 Mbps Full
100 Mbps Half
100 Mbps Full
If all four LAN Ports are down, a Tx Data Activity Minor Alarm will be generated.
If the WAN Port is down, ax and Rx Ethernet WAN Major Alarm will be generated.
MN-DMD2050E Revision 2
This Counter displays the total number of Ethernet packets received from the
satellite.
This counter displays the total number of Ethernet packets received from the
satellite that had errors.
This displays the Ethernet Packet Error Rate (PER) from the satellite.
Allows the user to reset the Ethernet Total Packets and Ethernet Error Count
by pressing <Enter>.
The following status is available under the Monitor Menu/Link Status Sub-
Menu when the Ethernet Data Interface is selected
Displays the current status of LAN Port 1.
Displays the current status of LAN Port 2.
Displays the current status of LAN Port 3.
Displays the current status of the WAN Port.
The link is down.
Unable to agree on connection speed.
Connected at 10 Base-T Half Duplex.
Connected at 10 Base-T Full Duplex.
Connected at 100 Base-T Half Duplex.
Connected at 100 Base-T Full Duplex.
Ethernet Data Interface Setup
H–5
Advertisement
Table of Contents
Troubleshooting
