Setting The Dive Time Interval Warning; Setting The Surface Interval Warning; Setting The Ascent Speed Alarm; Low Hr Alarm - Uwatec Galileo 2 User Manual

2 .3 .3 Setting the dive time interval
warning
You can set a dive time interval warning
from 15 seconds up to 10 minutes.
2 .3 .4 Setting the surface interval
warning
The surface interval warning can be set
from 15 seconds up to 14 minutes and 45
seconds.
F
NOTE: After 15 minutes on the
surface, the G2 automatically ends the
dive session and saves the dive in the
logbook.
GALILEO 2 (G2) USER MANUAL
2 .3 .5 Setting the ascent speed
alarm
You can select the value from 0.1-5.0m/
1-15ft per second.
2 .3 .6

Low HR alarm

The G2 can trigger an alarm if your heart
rate drops below a set level. The alarm
can be set between 35 and 100 beats per
minute.
29