Dive Mode At Surface; Surface Interval Counter; Gas Settings; Set Gas 1 - Uwatec Meridian Manual

Table of Contents

Advertisement

The dive computer functions of Meridian on 
the surface include, among others, setting 
the oxygen concentration for nitrox diving, 
setting the MB level of the decompression 
algorithm,  setting  various  warnings  and 
personal  preferences,.  To  reach  any  of 
these  functions,  Meridian  must  be  in  Dive 
surface mode display. This can be reached 
pressing  the  –/DOWN  button  once  from 
the  main  time  and  date  display,  until  text 
SCUBA, GAUGE or APNEA is shown (after 
a dive, more information may appear – this 
is described later in this chapter).
3.1.1
Dive mode at surface
When  you  have  not  been  diving  with  your 
Meridian  for  a  while  (no  desaturation  left) 
the  dive  mode  may  appear  as  shown 
below:
However in SCUBA mode after a dive, the 
display may appear as shown below:
From here (SCUBA mode, after a dive), by 
pressing the SEL/ESC button and scrolling 
with the +/UP or –/DOWN buttons, you can 
access a loop of additional menus related 
to  diving,  which  are:  surface  interval,  set 
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
gas,  set  scuba,  set  apnea  and  algorithm 
select.
3.1.2
Surface interval counter
After a dive the Meridian shows the surface 
interval  from  the  latest  dive.  The  surface 
interval  counter  counts  until  desaturation 
is  complete.  After  the  desaturation  is 
complete this menu disappears.
The no-fly time is shown at the upper row 
on the right corner in hours.
3.2 Gas settings
3.2.1
Set Gas 1
You  may  use  your  Meridian  with  all  nitrox 
mixes from Air to pure oxygen. 
By  pressing  the  SEL/ESC  button  in  this 
display  the  oxygen  mix  of  Gas  1  starts 
flashing. By pressing the +/UP or –/DOWN 
button you may scroll the value from 21 up 
to 100%. 
Warning
Diving with a ppO
higher than 1.4 is dangerous
2
and may lead to unconsciousness, drowning
and death.
By pressing SEL/ESC the maximum partial 
pressure  of  oxygen  (ppO
flashing. By pressing the +/UP or –/DOWN 
button you may select the value from 1.00 
bar up to 1.60 bar. 
No-fly time
Surface interval
 max)  starts 
2
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Meridian and is the answer not in the manual?

Questions and answers

Table of Contents