Checking The Desaturation Time; Checking The Surface Interval; Displaying The Date - Uwatec Aladin PRIME Operating Manual

2 Operation

2.6 Checking the desaturation time

No-fly time
Do not fly icon
NO
NO
DESAT T DESA
CNS O %
2
S S
L L
O O
W W
Desaturation time
Oxygen toxicity

2.7 Checking the surface interval

Surface interval

2.8 Displaying the date

Date
12
From the time of day display you can check the desaturation
time* by pushing
by oxygen toxicity, nitrogen saturation or the regression of
microbubbles, depending on which requires the longer time.
Microbubble
warning
The display switches back to the time of day display after 5
seconds without operation.
Residual
* Only displayed if there is a remaining saturation due to the last
nitrogen
dive or change of altitude.
bar
WARNING
From the time of day display you can check the surface interval by pushing
The surface interval is the time since the end of the last dive and is displayed as
long as there is remaining saturation.
From the time of day display you can display the date by pushing 1x or 2x
(depending on whether there is desaturation time left).
The display switches back to the time of day display after 5 seconds without
operation.
. Desaturation time is determined either
For the calculations of the desaturation and no-fly
time it is assumed that the diver breathes air while
on the surface.
I UWATEC ® Aladin ® dive computers
.