Atmos S 351 Operating Instructions Manual page 26

5.0 Operation
26
Presetting the vacuum with the foot regulator
The ATMOS S 351 Natal must be switched off before the foot
regulator is connected or disconnected. Completely depress
the connected foot regulator to the heel position.

Switch on the ATMOS S 351 Natal. Check that the lamp in
the switch is illuminated.

After the VE menu is displayed, switch into suction mode
by pressing the END button (or the
 
Using the button, select the vacuum value required which
is to be built up with the foot regulator (see vacuum / time
bar graph).

Apply the extraction cup and build up the vacuum required
in steps using the foot regulator (the foot regulator remains
in position if you take your foot away).

Switch into VE mode by pressing the extraction cup button.
The ATMOS S 351 Natal starts automatic vacuum build up
from the vacuum value set in suction mode. The time until
fi nal vacuum is shown at the top left of the display.

button).