4.0 Installation and commissioning
Fig. 11.
Fig. 12. Indicators and control panel
Display LED of vacuum extraction function
Button for switching on the automatic vacuum build up
Button for switching on the automatic vacuum release
Display (graphics)
Button for reducing the vacuum (with suction function)
Button for increasing the vacuum (with suction function)
Button for selecting the maximum vacuum (with suction function)
Check whether the voltage and frequency data listed on
the equipment correspond to the power supply and connect
the ATMOS S 351 Natal via the connector (
mains power. Secure the mains cable against accidental
removal using safety clamp
If the ATMOS S 351 is used for surgical procedures, we
recommend connecting it to the equipotential bon-ding
connection of the room via connection
If you have a foot regulator, connect it to its connection
(
, Fig. 11).
The ATMOS S 351 Natal is now ready for operation.
, Fig. 11) to
.
.
15