Default Settings - ZOLL WCD 3100 Training Manual

Default settings

All settings return to their default values when you set up a new patient.
Menu option
VT rate threshold
VF rate threshold
Secondary language
VT response time
VF response time
MD notification option
Patient sleep interval
Response time extension
Pulse energy
Post treatment message
Patient dial prefix
Patient dialing number
Patient dialer mode
Hospital dial prefix
Hospital dialing number
Hospital dialer mode
Clinical center code
Clinical center name
Time zone
Daylight savings time (DST)
Connection method
Phone number build code
Modem type
Modem initialization string override
Primary dialing number override
Primary login override
Secondary dialing override
Secondary login override
ZOLL Lifecor internal use only
Default setting
150 beats per minute
200 beats per minute
Off
60 seconds
25 seconds
Off
00:00 (midnight) and 06:00 (6:00 a.m.)
0 seconds
150 joules for all 5 shocks
Blank
Determined by device provider
Determined by device provider
Tone
Blank or determined by ZOLL Lifecor
Blank or determined by ZOLL Lifecor
Tone
Determined by ZOLL Lifecor
Determined by ZOLL Lifecor
Select from options determined by country
Default determined by country
Connection method most likely used in country
Defined by country
Defined by country
Blank, use only as directed by ZOLL Lifecor
Blank, use only as directed by ZOLL Lifecor
Blank, use only as directed by ZOLL Lifecor
Blank, use only as directed by ZOLL Lifecor
Blank, use only as directed by ZOLL Lifecor
Advanced programming
Page B-15