ZOLL WCD 3100 Training Manual page 29

ZOLL Lifecor internal use only
3 While the opening screen is displayed, hold the response
buttons and hold ◄ at the same time. Continue holding these
buttons until the display changes.
This screen may be displayed for more than 10 seconds.
4 Press ▲ or ▼ to choose a language, then press ►.
Note: The language you choose only affects the setup
screens and will not affect the patient screens.
5 Press ▲ or ▼ to select PULSE TEST, then press ►.
6 Connect the test plug to the monitor.
Leave the test plug connected until the test is complete.
Other procedures
Page 5-5