ZOLL WCD 3100 Training Manual page 52

LifeVest System WCD 3100 Training Manual
Connectivity menu and settings
Menu Menu option
Connection method
Phone number build
code
Modem type
Modem initialization
string override
Patient dialing number
override
Patient login override
Hospital dialing
override
Hospital login override
Phone number build example
Page B-14
What it means
Determines how monitor
accesses LifeVest Network,
whether through server
direct numbers or Internet
service provider numbers.
Describes how phone
number is constructed for
the country and locality
(see example below).
Type of modem used to
transfer data.
These values allow you to
enter manual dialing
information.
1 National direct dialing (NDD)
2 Area/city code
3 Phone number
How to select
Select the type of dialing method during
installation. Defaults to the type of
connection numbers most likely to be used
in the selected country. Does not normally
need to be changed. Contact ZOLL Lifecor
for assistance before changing this setting.
Select what gets dialed in front of phone
number if anything, including a national
direct dialing (NDD) number and area
code. The NDD number is the access
code used to make a call within a country
from one city to another. The NDD is
followed by the area/city code for location
being called. When calling another city in
the same vicinity, the NDD may not be
necessary. Does not normally need to be
changed. Contact ZOLL Lifecor for
assistance before changing this setting.
Select type of modem being used, based
on country where it will be used. Does not
normally need to be changed. Contact
ZOLL Lifecor for assistance before
changing this setting.
These values are normally not used. For
service purposes, ZOLL Lifecor may ask
you to enter a value.
ZOLL Lifecor internal use only