ZOLL WCD 3100 Training Manual page 46

LifeVest System WCD 3100 Training Manual
How to change language settings
Follow this procedure to set the patient's language for the displays and voice
prompts. A secondary language can also be selected for bystanders.
Page B-8
1 With the monitor in setup mode (see page B-6), press ▲ or ▼ to
select PATIENT, then press ►.
2 Press ▲ or ▼ to select SETTINGS, then press ►.
3 Press ▲ or ▼ to select LANGUAGE, then press ►.
4 Select a language preference as follows:
Press the response buttons so they light.
Press ▲ or ▼ to select a language. This is the language for the
displayed messages and voice prompts. Spanish has been
approved for use in the USA.
To save the change, press the response buttons.
5 Next you can select a secondary langauge if desired. The secondary
language is for voice prompts only and will be used in addition to the
primary lanagage.
To select a secondary language:
Press ▲ or ▼ to display the secondary language.
Press the response buttons so they light.
Press ▲ or ▼ to select a language. In the USA, if you selected
Spanish as the primary language (in step 4), select English as the
secondary language.
To save the change, press the response buttons.
To turn this option off, press the response buttons so they light, then
press ▲ or ▼ to select OFF, then press the response buttons again.
6 Press ◄ repeatedly to return to the opening menu.
ZOLL Lifecor internal use only