ZOLL WCD 3100 Training Manual page 40

LifeVest System WCD 3100 Training Manual
About the menus
Menu What it lets you select or enter
New patient menu Patient's name and VT/VF rate threshold
settings (in beats per minute).
Name menu Patient's name for the displayed
messages and voice prompts.
Language menu Languages for the displayed messages
and voice prompts. This language is for
the patient, and does not affect the
language displayed during setup
Treatment menu Defaults and options for rate thresholds (in
beats per minute), response time (how
many seconds until the device delivers the
defibrillating shock), pulse energy (in
joules), and other treatment options.
Dialer menu Phone number dialing modes (touch tone
or pulse) and dialing prefixes (any
numbers that need to be dialed in front of
the phone number) for dialing out when
sending patient data.
Country menu Country where device is being used.
Locality menu Clinical center code and name that the
patient is associated with. Time zone and
daylight savings time (on or off) for the
locality where the device is being used.
Connectivity menu Details associated with the modem and
phone dialing.
Page B-2
When to use it
To set up a new patient. See Operator's Manual.
To change or correct a patient's name.
To set the patient's language for the displays and voice
prompts. A secondary language can also be selected
for bystanders.
May need to be programmed when setting up a new
patient, or to change a patient's treatment settings.
Enter the details about the phone system when
installing the device. Update this menu if there are any
changes to the phone system that require updates to
the dialing mode or prefix.
Select the country when installing the device. The
country affects all of the communication settings, so it
must be selected first. The country selected also
defines whether you must select a dialing number.
When setting up the device for initial use, or if the
device is moved to another location.
When setting up a new patient, to define the
connection method, phone number build code, and
modem type (if different from defaults). Remaining
settings (overrides) are normally not used.
ZOLL Lifecor internal use only