Serial Port 6 Configuration - IEI Technology gKINO-DMF-421-R10 User Manual

gKINO-DMF SBC

Transfer Mode [RS232]
Use the Transfer Mode option to select the Serial Port 5 signaling mode.

RS422

RS485

RS232

5.3.4.1.6 Serial Port 6 Configuration


Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled

Enabled

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

IO=2F0h; IRQ=11

IO=3E8h; IRQ=3,
4,5,6,7,9,10,11,12

IO=2E8h; IRQ=3,
4,5,6,7,9,10,11,12

IO=2E0h; IRQ=3,
4,5,6,7,9,10,11,12
Serial Port 5 signaling mode is RS-422
Serial Port 5 signaling mode is RS-485
D Serial Port 5 signaling mode is RS-232
EFAULT
Disable the serial port
D Enable the serial port
EFAULT
Serial Port I/O port address is 2F0h and the
D
EFAULT
interrupt address is IRQ11
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Serial Port I/O port address is 2E0h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Page 77