Rtc Wake Settings - IEI Technology gKINO-DMF-421-R10 User Manual


Auto mode fan slope PWM
The Auto mode fan slope PWM option can only be set if the CPU_FAN1/SYS_FAN1
Smart Fan control option is set to Auto Mode. Use the Auto mode fan slope PWM
option to select the linear rate at which the PWM mode increases with respect to an
increase in temperature. To set a value, select the Auto mode fan slope PWM option and
enter a decimal number between 1 and 8.

5.3.6 RTC Wake Settings

The RTC Wake Settings menu (BIOS Menu 10) configures RTC wake event.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Advanced
Wake system with Fixed Time
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 10: RTC Wake Settings

Wake system with Fixed Time [Disabled]
Use the Wake system with Fixed Time option to enable or disable the system wake on
alarm event.

Disabled

Enabled
Page 82
[Disabled]
D The real time clock (RTC) cannot generate a wake
EFAULT
event
If selected, the Wake up every day option appears
allowing you to enable to disable the system to wake
gKINO-DMF SBC
Enable or disable System
wake on alarm event. When
enabled, System will
wake on the
date::hr::min::sec
specified
----------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save
ESC Exit