IEI Technology ICE-BT-T6 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Motherboard
  5. ICE-BT-T6
  6. User manual

IEI Technology ICE-BT-T6 User Manual

Com express r2.1 module (type 6), 22nm intel atom or celeron processor 2gb ddr3, eeprom and rohs compliant
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ICE-BT-T6 COM Express Module
MODEL:
ICE-BT-T6
COM Express R2.1 Module (Type 6),
22nm Intel® Atom™ or Celeron® Processor
2 GB DDR3, EEPROM and RoHS Compliant

User Manual

Page i
Rev. 1.00 – September 23, 2014

Advertisement

Table of Contents
loading

Related Manuals for IEI Technology ICE-BT-T6

Summary of Contents for IEI Technology ICE-BT-T6

  • Page 1: User Manual

    ICE-BT-T6 COM Express Module MODEL: ICE-BT-T6 COM Express R2.1 Module (Type 6), 22nm Intel® Atom™ or Celeron® Processor 2 GB DDR3, EEPROM and RoHS Compliant User Manual Page i Rev. 1.00 – September 23, 2014...
  • Page 2 ICE-BT-T6 COM Express Module Revision Date Version Changes 1.00 Initial release September 23, 2014 Page ii...
  • Page 3 ICE-BT-T6 COM Express Module Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 4: Table Of Contents

    ICE-BT-T6 COM Express Module Table of Contents 1 INTRODUCTION......................1 1.1 I ......................2 NTRODUCTION 1.2 M ....................3 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 B ..................... 4 OARD VERVIEW 1.5 D ....................... 5 IMENSIONS 1.6 D ........................ 6 1.7 T...
  • Page 5 ICE-BT-T6 COM Express Module 5 BIOS ..........................33 5.1 I ......................34 NTRODUCTION 5.1.1 Starting Setup....................34 5.1.2 Using Setup ...................... 34 5.1.3 Getting Help..................... 35 5.1.4 Unable to Reboot after Configuration Changes ..........35 5.1.5 BIOS Menu Bar....................35 5.2 M...
  • Page 6 ICE-BT-T6 COM Express Module 6.2 S ................72 TARTING THE RIVER ROGRAM 6.3 C ................74 HIPSET RIVER NSTALLATION 6.4 G ................77 RAPHICS RIVER NSTALLATION 6.5 LAN D ..................80 RIVER NSTALLATION A BIOS OPTIONS ......................85 B TERMINOLOGY......................88 C DIGITAL I/O INTERFACE..................
  • Page 7 ICE-BT-T6 COM Express Module List of Figures Figure 1-1: ICE-BT-T6 ........................2 Figure 1-2: On-board Components and Connectors ..............4 Figure 1-3: ICE-BT-T6 Dimensions (mm) ..................5 Figure 1-4: Data Flow Diagram......................6 Figure 3-1: Connectors (Front Side) ...................14 Figure 3-2: Connectors (Solder Side) ..................14 Figure 3-3: COM Express Connector AB Location ..............16...
  • Page 8 ICE-BT-T6 COM Express Module List of Tables Table 1-1: Model Variations ......................3 Table 1-2: ICE-BT-T6 Specifications .....................8 Table 2-1: Packing List.........................11 Table 2-2: Optional Items......................12 Table 3-1: Peripheral Interface Connectors ................15 Table 3-2: COM Express Connector Pin Definitions ..............20 Table 3-3: COM Express Connector CD Pin Definitions............24 Table 4-1: LVDS Panel Type Selection ..................30...
  • Page 9 ICE-BT-T6 COM Express Module BIOS Menus BIOS Menu 1: Main ........................36 BIOS Menu 2: Advanced ......................37 BIOS Menu 3: ACPI Settings .......................38 BIOS Menu 4: IT8528 Super IO Configuration ................39 BIOS Menu 5: Serial Port n Configuration Menu...............39 BIOS Menu 6: Hardware Monitor....................42 BIOS Menu 7: Smar Fan Function....................43...

  • Page 11: Introduction

    ICE-BT-T6 COM Express Module Chapter Introduction Page 1...

  • Page 12: Introduction

    COM Express baseboard to be designed, while leaving the choice of processor till the later stages of design. The ICE-BT-T6 provides a low power option with the full range of modern I/O options. The ICE-BT-T6 embedded module is designed for flexible integration by system developers into customized platform devices.

  • Page 13: Model Variations

    ICE-BT-T6 COM Express Module 1.2 Model Variations The model variations for the ICE-BT-T6 series are listed in Table 1-1. On-board SoC Memory Model Name Clock Speed # of Cores L2 Cache Max TDP Slot # ICE-BT-T6-J19001 Intel® Celeron® J1900 2.0 GHz...

  • Page 14: Board Overview

    ICE-BT-T6 COM Express Module 1.4 Board Overview The on-board components and connectors of the ICE-BT-T6 are shown in the figures below. Figure 1-2: On-board Components and Connectors Page 4...

  • Page 15: Dimensions

    ICE-BT-T6 COM Express Module 1.5 Dimensions The main dimensions of the ICE-BT-T6 are shown in the diagram below. Figure 1-3: ICE-BT-T6 Dimensions (mm) Page 5...

  • Page 16: Data Flow

    ICE-BT-T6 COM Express Module 1.6 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 6...

  • Page 17: Technical Specifications

    ICE-BT-T6 COM Express Module 1.7 Technical Specifications The ICE-BT-T6 technical specifications are listed below. ICE-BT-T6 Form Factor PICMG COM Express R2.1 Type 6  Standard Intel® Celeron® processor J1900 (2GHz, quad-core, 2MB cache, TDP=10W) Intel® Celeron® processor N2930 (1.83GHz, quad-core, 2MB cache, TDP=7.5W) Intel®...

  • Page 18: Table 1-2: Ice-Bt-T6 Specifications

    ICE-BT-T6 COM Express Module ICE-BT-T6 Software programmable supports 1~255 sec. system reset Watchdog Timer Two SATA 3Gb/s (signal to baseboard) Storage Optional on-board 4 GB SSD (SATA port1) One VGA (up to 2560 x 1600) One DDI 1 (DP/HDMI, max. resolution: 2560x1600/1920x1080)

  • Page 19: Packing List

    ICE-BT-T6 COM Express Module Chapter Packing List Page 9...

  • Page 20: Anti-Static Precautions

    Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the ICE-BT-T6 is unpacked, please do the following:  Follow the antistatic guidelines above.

  • Page 21: Packing List

    If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the ICE-BT-T6 was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.

  • Page 22: Optional Items

    ICE-BT-T6 COM Express Module 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image Baseboard for COM Express Type 6 modules (P/N: ICE-DB-T6R-R10) Table 2-2: Optional Items Page 12...

  • Page 23: Connectors

    ICE-BT-T6 COM Express Module Chapter Connectors Page 13...

  • Page 24: Peripheral Interface Connectors

    ICE-BT-T6 COM Express Module 3.1 Peripheral Interface Connectors This chapter details all the connectors. 3.1.1 ICE-BT-T6 Layout The figure below shows all the connectors. Figure 3-1: Connectors (Front Side) Figure 3-2: Connectors (Solder Side) Page 14...

  • Page 25: Peripheral Interface Connectors

    ICE-BT-T6 COM Express Module 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the ICE-BT-T6. Connector Type Label COM Express connector AB COM Express connector COM Express connector CD COM Express connector DDR3 SO-DIMM slot 204-pin SO-DIMM slot...

  • Page 26: Internal Peripheral Connectors

    ICE-BT-T6 COM Express Module 3.2 Internal Peripheral Connectors The section describes all of the connectors on the ICE-BT-T6. 3.2.1 COM Express Connector AB CN Label: 220-pin COM Express connector CN Type: CN Location: See Figure 3-3 CN Pinouts: See Table 3-2 The standard COM Express connector AB location and pinouts are shown below.
  • Page 27 ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description GBE0_MDI1- LPC_DRQ1# GBE0_MDI1+ LPC_CLK GND1 GND16 GBE0_MDI0- PWRBTN# GBE0_MDI0+ SMB_CK GBE0_CTREF SMB_DAT SUS_S3# SMB_ALERT# SATA0_TX+ SATA1_TX+ SATA0_TX- SATA1_TX- SUS_S4# SUS_STAT# SATA0_RX+ SATA1_RX+ SATA0_RX- SATA1_RX- GND2 GND17 RSVD RSVD RSVD RSVD...
  • Page 28 ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description GND4 USB2- USB3- USB2+ USB3+ USB_2_3_OC# USB_0_1_OC# USB0- USB1- USB0+ USB1+ VCC_RTC RSVD RSVD RSVD RSVD SYS_RESET# LPC_SERIRQ CB_RESET# GND5 GND20 RSVD RSVD RSVD RSVD GPI0 GPO1 PCIE_TX4+ PCIE_RX4+ PCIE_TX4-...
  • Page 29 ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description LVDS_A1+ LVDS_B1+ LVDS_A1- LVDS_B1- LVDS_A2+ LVDS_B2+ LVDS_A2- LVDS_B2- LVDS_VDD_EN LVDS_B3+ LVDS_A3+ LVDS_B3- LVDS_A3- LVDS_BKLT_EN GND10 GND23 LVDS_A_CK+ LVDS_B_CK+ LVDS_A_CK- LVDS_B_CK- LVDS_I2C_CK LVDS_BKLT_CTRL LVDS_I2C_DAT VCC5SBY1 GPI3 VCC5SBY2 RSVD VCC5SBY3 RSVD VCC5SBY4...

  • Page 30: Com Express Connector Cd

    ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description VCC_12V8 VCC_12V17 A105 B105 VCC_12V9 VCC_12V18 A106 B106 VCC_12V10 VCC_12V19 A107 B107 VCC_12V11 VCC_12V20 A108 B108 VCC_12V12 VCC_12V21 A109 B109 GND14 GND26 A110 B110 Table 3-2: COM Express Connector Pin Definitions 3.2.2 COM Express Connector CD...
  • Page 31 ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description GND0 GND15 USB_SSRX0- USB_SSTX0- USB_SSRX0+ USB_SSTX0+ USB_SSRX1- USB_SSTX1- USB_SSRX1+ USB_SSTX1+ USB_SSRX2- USB_SSTX2- USB_SSRX2+ USB_SSTX2+ GND1 GND16 USB_SSRX3- USB_SSTX3- USB_SSRX3+ USB_SSTX3+ DDI1_CTRLCLK_AUX+ RSVD (by request*) DDI1_CTRLDATA_AUX- RSVD (by request*) RSVD RSVD...
  • Page 32 ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description DDI2_CTRLCLK_AUX+ DDI1_PAIR2+ (by request*) DDI2_CTRLDATA_AUX- DDI1_PAIR2- (by request*) DDI1_DDC_AUX_SEL DDI2_DDC_AUX_SEL (by request*) RSVD RSVD RSVD DDI1_PAIR3+ (by request*) RSVD DDI1_PAIR3- (by request*) RSVD RSVD RSVD DDI2_PAIR0+ RSVD DDI2_PAIR0- GND4 GND19...
  • Page 33 ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description RSVD1 RSVD10 RSVD2 RSVD9 RSVD RSVD RSVD RSVD RSVD3 GND28 RSVD RSVD RSVD RSVD GND9 GND22 RSVD RSVD RSVD RSVD RSVD RSVD RSVD RSVD RSVD RSVD GND8 GND29 RSVD4 RSVD...

  • Page 34: So-Dimm Connectors

    ICE-BT-T6 COM Express Module Pin No. Description Pin No. Description RSVD RSVD GND12 GND33 RSVD6 RSVD RSVD RSVD RSVD RSVD GND13 GND25 C100 D100 RSVD RSVD C101 D101 RSVD RSVD C102 D102 GND34 C103 D103 VCC_12V1 VCC_12V7 C104 D104 VCC_12V2...

  • Page 35: Figure 3-5: So-Dimm Connector Locations

    If there is only one memory module being installed, install it in the DIMM1 slot. Some of the ICE-BT-T6 models only have one SO-DIMM slot. Please refer to Table 1-1: Model Variations for detailed information. Figure 3-5: SO-DIMM Connector Locations...

  • Page 36: Installation

    ICE-BT-T6 COM Express Module Chapter Installation Page 26...

  • Page 37: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ICE-BT-T6. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ICE-BT-T6 or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
  • Page 38  Turn all power to the ICE-BT-T6 off: When working with the ICE-BT-T6, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the ICE-BT-T6 DO NOT: ...

  • Page 39: So-Dimm Installation

    Figure 4-1. Figure 4-1: SO-DIMM Installation Step 1: Locate the SO-DIMM socket. Place the ICE-BT-T6 on an anti-static pad with the solder side facing up. Step 2: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a way that the notch in the middle of the SO-DIMM must be aligned with the plastic bridge in the socket.

  • Page 40: Jumper Settings

    ICE-BT-T6 COM Express Module Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into place and secure the SO-DIMM in the socket. 4.4 Jumper Settings 4.4.1 LVDS Panel Type Selection Jumper Label: Jumper Type: DIP switch...

  • Page 41: Mounting Ice-Bt-T6 To Baseboard

    Follow the steps below to install the ICE-BT-T6 to the optional baseboard. Step 1: Align the two COM Express connector on the solder side of the ICE-BT-T6 with the corresponding connector on the baseboard. Gently push the COM Express module down to ensure the connectors are properly connected (Figure 4-3).

  • Page 42: Figure 4-3: Connect The Com Express Connectors

    ICE-BT-T6 COM Express Module Figure 4-3: Connect the COM Express Connectors Step 2: Ensure a thermal pad is placed on the CPU of the ICE-BT-T6. Step 3: Place the heatsink on the ICE-BT-T6, aligning the retention screw holes (Figure 4-4).

  • Page 43: Bios

    ICE-BT-T6 COM Express Module Chapter BIOS Page 33...

  • Page 44: Introduction

    ICE-BT-T6 COM Express Module 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways.

  • Page 45: Getting Help

    ICE-BT-T6 COM Express Module Function Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu General help, only for Status Page Setup Menu and Option...

  • Page 46: Main

    ICE-BT-T6 COM Express Module 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.

  • Page 47: Advanced

    ICE-BT-T6 COM Express Module 5.3 Advanced Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING: Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.

  • Page 48: Acpi Settings

    ICE-BT-T6 COM Express Module 5.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced ACPI Settings Select ACPI sleep state...

  • Page 49: Super Io Configuration

    ICE-BT-T6 COM Express Module 5.3.2 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 4) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced Super IO Configuration...
  • Page 50 ICE-BT-T6 COM Express Module 5.3.2.1.1 Serial Port 1 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
  • Page 51 ICE-BT-T6 COM Express Module 5.3.2.1.2 Serial Port 2 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 52: Hardware Monitor

    ICE-BT-T6 COM Express Module 5.3.3 Hardware Monitor The Hardware Monitor menu (BIOS Menu 6) displays the CPU temperature and CPU fan speed, and contains the fan configuration submenu. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced PC Health Status Enable or Disable Smart >...

  • Page 53: Smart Fan Function

    ICE-BT-T6 COM Express Module 5.3.3.1 Smart Fan Function Use the Smart Fan Function submenu (BIOS Menu 7) to configure the smart fan temperature and speed settings. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced Smart Fan Mode Configuration CPU Smart Fan control settings.

  • Page 54: It8518 Super Io Configuration

    ICE-BT-T6 COM Express Module 5.3.4 IT8518 Super IO Configuration Use the IT8518 Super IO Configuration menu (BIOS Menu 8) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced...
  • Page 55 ICE-BT-T6 COM Express Module 5.3.4.1.1 Serial Port 3 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
  • Page 56 ICE-BT-T6 COM Express Module  IO=2F0h; Serial Port I/O port address is 2F0h and the interrupt IRQ=3, 4, address is IRQ3, 4, 5, 6, 7, 9, 10, 11, 12 5, 6, 7, 9, 10, 11, 12  Serial Port I/O port address is 2E0h and the interrupt IO=2E0h;...
  • Page 57 ICE-BT-T6 COM Express Module  IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4, address is IRQ3, 4, 5, 6, 7, 9, 10, 11, 12 5, 6, 7, 9, 10, 11, 12  Serial Port I/O port address is 3E8h and the interrupt IO=3E8h;...

  • Page 58: Rtc Wake Settings

    ICE-BT-T6 COM Express Module 5.3.5 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 10) enables the system to wake at the specified time. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced Wake system with Fixed Time...

  • Page 59: Serial Port Console Redirection

    ICE-BT-T6 COM Express Module Wake up minute Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.6 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 11) allows the console redirection options to be configured.
  • Page 60 ICE-BT-T6 COM Express Module NOTE: The following five options appear when the Console Redirection option is enabled.  Terminal Type [ANSI] Use the Terminal Type option to specify the remote terminal type.  VT100 The target terminal type is VT100 ...
  • Page 61 ICE-BT-T6 COM Express Module  Parity [None] Use the Parity option to specify the parity bit that can be sent with the data bits for detecting the transmission errors.  None No parity bit is sent with the data bits.

  • Page 62: Cpu Configuration

    ICE-BT-T6 COM Express Module 5.3.7 CPU Configuration Use the CPU Configuration menu (BIOS Menu 12) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced CPU Configuration Number of cores to enable in each processor Intel(R) Atom(TM) CPU E3827 @ 1.74GHz...
  • Page 63 ICE-BT-T6 COM Express Module  L1 Code Cache: Lists the amount of code storage space on the L1 cache.  L2 Cache: Lists the amount of storage space on the L2 cache.  L3 Cache: Lists the amount of storage space on the L3 cache.

  • Page 64: Thermal Configuration

    ICE-BT-T6 COM Express Module 5.3.8 Thermal Configuration Use the Thermal Configuration menu (BIOS Menu 13) to configure the thermal control settings. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced Thermal Configuration Parameters This value controls the temperature of the ACPI...
  • Page 65 ICE-BT-T6 COM Express Module  55 C  47 C  39 C  31 C  23 C  15 C  Passive Trip Point Use the Passive Trip Point option to control the temperature of the ACPI passive trip point in which the OS will begin throttling the processor.

  • Page 66: Ide Configuration

    ICE-BT-T6 COM Express Module 5.3.9 IDE Configuration Use the IDE Configuration menu (BIOS Menu 14) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced...
  • Page 67 ICE-BT-T6 COM Express Module  SATA Port1 HotPlug [Disabled] Use the SATA Port1 HotPlug option to enable or disable hotplug function of SATA port 1.  Enables SATA port 1 hotplug. Enabled  Disabled Disables SATA port 1 hotplug. EFAULT ...

  • Page 68: Trusted Computing

    ICE-BT-T6 COM Express Module 5.3.10 Trusted Computing Use the Trusted Computing menu (BIOS Menu 15) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced...

  • Page 69: Usb Configuration

    ICE-BT-T6 COM Express Module 5.3.11 USB Configuration Use the USB Configuration menu (BIOS Menu 16) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Page 70: Chipset

    ICE-BT-T6 COM Express Module  Disabled Legacy USB support disabled  Legacy USB support disabled if no USB devices are Auto connected 5.4 Chipset Use the Chipset menu (BIOS Menu 17) to access the North Bridge and South Bridge configuration menus.

  • Page 71: North Bridge

    ICE-BT-T6 COM Express Module 5.4.1 North Bridge Use the North Bridge menu (BIOS Menu 18) to configure the north bridge parameters. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset > Intel IGD Configuration Config Intel IGD Settings.
  • Page 72 ICE-BT-T6 COM Express Module  Primary Display [Auto] Use the Primary Display option to select the primary graphics controller the system uses. The following options are available:  Auto  Default    DVMT Pre-Allocated [256M] Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots.

  • Page 73: South Bridge Configuration

    ICE-BT-T6 COM Express Module 5.4.2 South Bridge Configuration Use the South Bridge menu ( B IOS Menu 20) to configure the south bridge chipset. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset > Azalia HD Audio Azalia HD Audio Options >...

  • Page 74: Azalia Hd Audio

    ICE-BT-T6 COM Express Module 5.4.2.1 Azalia HD Audio Use the Azalia HD Audio submenu (BIOS Menu 21) to configure the High Definition Audio codec. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset Audio Configuration Control Detection of the...

  • Page 75: Pci Express Configuration

    ICE-BT-T6 COM Express Module 5.4.2.2 PCI Express Configuration Use the PCI Express Configuration menu (BIOS Menu 22) to select the support type of the PCI Express or PCIe Mini slots. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.

  • Page 76: Security

    ICE-BT-T6 COM Express Module 5.5 Security Use the Security menu (BIOS Menu 23) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set,...

  • Page 77: Boot

    ICE-BT-T6 COM Express Module 5.6 Boot Use the Boot menu (BIOS Menu 24) to configure system boot options. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...
  • Page 78 ICE-BT-T6 COM Express Module  Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  Enabled OEM Logo displayed instead of POST messages EFAULT  Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode.

  • Page 79: Save & Exit

    ICE-BT-T6 COM Express Module 5.7 Save & Exit Use the Save & Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
  • Page 80 ICE-BT-T6 COM Express Module  Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options. Page 70...

  • Page 81: Software Drivers

    ICE-BT-T6 COM Express Module Chapter Software Drivers Page 71...

  • Page 82: Available Software Drivers

    ICE-BT-T6 COM Express Module 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates.

  • Page 83: Figure 6-1: Start Up Screen

    ICE-BT-T6 COM Express Module Figure 6-1: Start Up Screen Step 3: Click ICE-BT-T6. Step 4: The list of drivers in Figure 6-2 appears. Figure 6-2: Drivers Page 73...

  • Page 84: Chipset Driver Installation

    ICE-BT-T6 COM Express Module 6.3 Chipset Driver Installation To install the chipset driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “1-Bay Trail SOC” and select the folder which corresponds to the operating system.

  • Page 85: Figure 6-4: Chipset Driver License Agreement

    ICE-BT-T6 COM Express Module Step 6: Click Yes to accept the agreement and continue. Figure 6-4: Chipset Driver License Agreement Step 7: The Read Me file in Figure 6-5 appears. Step 8: Click Next to continue. Figure 6-5: Chipset Driver Read Me File...

  • Page 86: Figure 6-6: Chipset Driver Setup Operations

    ICE-BT-T6 COM Express Module Step 9: Setup Operations are performed as shown in Figure 6-6. Step 10: Once the Setup Operations are complete, click Next to continue. Figure 6-6: Chipset Driver Setup Operations Step 11: The Finish screen in Figure 6-7 appears.

  • Page 87: Graphics Driver Installation

    ICE-BT-T6 COM Express Module 6.4 Graphics Driver Installation To install the graphics driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “1-Bay Trail SOC” and select the folder which corresponds to the operating system.

  • Page 88: Figure 6-8: Graphics Driver License Agreement

    ICE-BT-T6 COM Express Module Figure 6-8: Graphics Driver License Agreement Step 6: The License Agreement in Figure 6-9 appears. Step 7: Click Yes to accept the agreement and continue. Figure 6-9: Graphics Driver Read Me File Step 8: The Read Me file in Figure 6-10 appears. Click Next to continue.

  • Page 89: Figure 6-10: Graphics Driver Setup Operations

    ICE-BT-T6 COM Express Module Figure 6-10: Graphics Driver Setup Operations Step 9: Setup Operations are performed as shown in Figure 6-11. Step 10: Once the Setup Operations are complete, click Next to continue. Figure 6-11: Graphics Driver Installation Finish Screen Step 11: The system starts installing the Graphics Driver.

  • Page 90: Lan Driver Installation

    ICE-BT-T6 COM Express Module Step 13: Select “Yes, I want to restart this computer now” and click Finish. Step 0: Figure 6-12: Graphics Driver Installation Finish Screen 6.5 LAN Driver Installation To install the LAN driver, please do the following.

  • Page 91: Figure 6-13: Windows Control Panel

    ICE-BT-T6 COM Express Module Figure 6-13: Windows Control Panel Step 2: The system control panel window in Figure 6-14 appears. Step 3: Click the Device Manager link (Figure 6-14). Figure 6-14: System Control Panel Page 81...

  • Page 92: Figure 6-15: Device Manager List

    ICE-BT-T6 COM Express Module Step 4: A list of system hardware devices appears (Figure 6-15). Step 5: Right-click the Ethernet Controller that has question marks next to it (this means Windows does not recognize the device). Step 6: Select Update Driver Software.

  • Page 93: Figure 6-16: Update Driver Software Window

    ICE-BT-T6 COM Express Module Figure 6-16: Update Driver Software Window Step 8: Select “Browse my computer for driver software” and click N to continue. Step 9: Click Browse to select “X:\2-LAN\Intel” directory in the Locate File window, where “X:\” is the system CD drive. (Figure 6-17).
  • Page 94 ICE-BT-T6 COM Express Module Step 11: Driver Installation is performed. When the Finish screen appears, click Close to exit. Step 12: Right-click the other Ethernet controller that has question marks next to it as shown in Figure 6-15. Repeat Step 6–Step 11 to install the second Ethernet controller driver.

  • Page 95: Abios Options

    ICE-BT-T6 COM Express Module Appendix BIOS Options Page 85...
  • Page 96 ICE-BT-T6 COM Express Module Below is a list of BIOS configuration options in the BIOS chapter. 　 System Date [xx/xx/xx] ......................36 　 System Time [xx:xx:xx] .......................36 　 ACPI Sleep State [S3 (Suspend to RAM)]................38 　 Serial Port [Enabled]......................40 　 Change Settings [Auto] .......................40 　...
  • Page 97 ICE-BT-T6 COM Express Module 　 USB Devices .........................59 　 Legacy USB Support [Enabled]..................59 　 Primary Display [Auto] ......................62 　 DVMT Pre-Allocated [256M] ....................62 　 DVMT Total Gfx Mem [Max]....................62 　 Primary IGFX Boot Display [VBIOS Default] ..............62 　 Restore AC Power Loss [Last State] .................63 　...

  • Page 98: B Terminology

    ICE-BT-T6 COM Express Module Appendix Terminology Page 88...
  • Page 99 ICE-BT-T6 COM Express Module AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
  • Page 100 ICE-BT-T6 COM Express Module DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
  • Page 101 ICE-BT-T6 COM Express Module LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.

  • Page 102: C Digital I/O Interface

    ICE-BT-T6 COM Express Module Appendix Digital I/O Interface Page 92...

  • Page 103: Introduction

    ICE-BT-T6 COM Express Module C.1 Introduction The DIO connector on the ICE-BT-T6 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices.

  • Page 104: Assembly Language Sample 1

    ICE-BT-T6 COM Express Module C.2 Assembly Language Sample 1 AX, 6F08H ;setting the digital port as input AL low byte = value AH – 6FH Sub-function: AL – 9 :Set the digital port as OUTPUT :Digital I/O input value C.3 Assembly Language Sample 2 AX, 6F09H ;setting the digital port as output...

  • Page 105: D Watchdog Timer

    ICE-BT-T6 COM Express Module Appendix Watchdog Timer Page 95...
  • Page 106 ICE-BT-T6 COM Express Module NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
  • Page 107 ICE-BT-T6 COM Express Module NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...

  • Page 108: E Hazardous Materials Disclosure

    ICE-BT-T6 COM Express Module Appendix Hazardous Materials Disclosure Page 98...

  • Page 109: Hazardous Materials Disclosure Table For Ipb Products Certified As Rohs Compliant Under 2002/95/Ec Without Mercury

    ICE-BT-T6 COM Express Module E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 110 ICE-BT-T6 COM Express Module Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
  • Page 111 ICE-BT-T6 COM Express Module 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。...

Table of Contents