So-Dimm Installation; Figure 4-1: So-Dimm Installation (Ddr4) - IEI Technology gKINO-DMF-421-R10 User Manual
Gkino-dmf series.
mini-itx sbc supports amd rx-421bd/216gd on board soc (quad-core 2.1ghz, 35w), ddr4, triple independent displays, hdmi/dp, dual gbe, sata 6gb/s, usb 3.0, pcie mini, m.2, hd audio and rohs
Table of Contents
Advertisement
4.3 SO-DIMM Installation
To install a SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation (DDR4)
Step 1:
Open the SO-DIMM socket handles. Open the two handles outwards as far as
they can. See Figure 4-1.
Step 2:
Align the SO-DIMM with the socket. Align the SO-DIMM so the notch on the
memory lines up with the notch on the memory socket. See Figure 4-1.
Step 3:
Insert the SO-DIMM. Once aligned, press down until the SO-DIMM is properly
seated. Clip the two handles into place. See Figure 4-1.
Step 4:
Removing a SO-DIMM. To remove a SO-DIMM, push both handles outward.
The memory module is ejected by a mechanism in the
Page 52
gKINO-DMF SBC
socket.Step 0:
Advertisement
Table of Contents
