IEI Technology gKINO-DMF-421-R10 User Manual page 98


Power Saving Function [Disabled]
Use the Power Saving Function BIOS option to enable or disable the power saving
function.

Disabled D

Enabled

USB Power SW1/SW2 [+5V DUAL]
Use the USB Power SW1/SW2 BIOS option to configure whether to provide power to the
USB connector when the system is off. This option is valid only when the above Power
Saving Function BIOS option is disabled.

+5V D
DUAL

+5V
Page 84
Power saving function is disabled.
EFAULT
Power saving function is enabled. It will reduce power
consumption when the system is off.
Power is provided to the USB connector when the
EFAULT
system is off
Power is not provided to the USB connector when the
system is off
gKINO-DMF SBC