Chassis Installation; Airflow; Motherboard Installation; Figure 4-11: M.2 And Sata2 Select Switch Location - IEI Technology gKINO-DMF-421-R10 User Manual
Gkino-dmf series.
mini-itx sbc supports amd rx-421bd/216gd on board soc (quad-core 2.1ghz, 35w), ddr4, triple independent displays, hdmi/dp, dual gbe, sata 6gb/s, usb 3.0, pcie mini, m.2, hd audio and rohs
Table of Contents
Advertisement
Figure 4-11: M.2 and SATA2 Select Switch Location
4.7 Chassis Installation
4.7.1 Airflow
WARNING:
Airflow is critical for keeping components within recommended
operating temperatures. The chassis should have fans and vents as
necessary to keep things cool.
The gKINO-DMF must be installed in a chassis with ventilation holes on the sides allowing
airflow to travel through the heat sink surface. In a system with an individual power supply
unit, the cooling fan of a power supply can also help generate airflow through the board
surface.
4.7.2 Motherboard Installation
To install the gKINO-DMF motherboard into the chassis please refer to the reference
material that came with the chassis.
Page 60
gKINO-DMF SBC
Advertisement
Table of Contents
