IEI Technology gKINO-DMF-421-R10 User Manual page 95

gKINO-DMF SBC

Auto mode fan start temperature
WARNING:
Setting this value too high may cause the fan to rotate at full speed only
when the CPU is at a very high temperature and therefore cause the
system to be damaged.
The Auto mode
CPU_FAN1/SYS_FAN1 Smart Fan Control option is set to Auto Mode. If the system
temperature is between Start Temperature and Off Temperature, the fan speed change
to be Start PWM. To set a value, select the Auto mode fan start temperature option and
enter a decimal number between 1 and 100.

Auto mode fan off temperature
WARNING:
Setting this value too high may cause the fan to speed up only when
the CPU is at a very high temperature and therefore cause the system
to be damaged.
The Auto mode
CPU_FAN1/SYS_FAN1 Smart Fan control option is set to Auto Mode. If the system
temperature is lower than Auto mode fan off temperature, the fan speed change to be
lowest. To set a value, select the Auto mode fan off temperature option and enter a
decimal number between 1 and 100.

Auto mode fan start PWM
The Auto mode fan start PWM option can only be set if the CPU_FAN1/SYS_FAN1
Smart Fan control option is set to Auto Mode. Use the Auto mode fan start PWM
option to set the PWM start value. To set a value, select the Auto mode fan start PWM
option and enter a decimal number between 1 and 100.
fan start temperature
fan off temperature
option can only be
option can only be
set if the
set if the
Page 81