System Configuration; At/Atx Mode Select Switch; Figure 4-9: At/Atx Mode Select Switch Location; Table 4-1: At/Atx Mode Select Switch Settings - IEI Technology gKINO-DMF-421-R10 User Manual
Gkino-dmf series.
mini-itx sbc supports amd rx-421bd/216gd on board soc (quad-core 2.1ghz, 35w), ddr4, triple independent displays, hdmi/dp, dual gbe, sata 6gb/s, usb 3.0, pcie mini, m.2, hd audio and rohs
Table of Contents
Advertisement
4.6 System Configuration
The system configuration is controlled by buttons, jumpers and switches. The system
configuration should be performed before installation.
4.6.1 AT/ATX Mode Select Switch
The AT/ATX mode select switch (J_ATX_AT1) specifies the systems power mode as AT
or ATX. AT/ATX mode select switch settings are shown in Table 4-1.
Setting
Short A-B
Short B-C
Table 4-1: AT/ATX Mode Select Switch Settings
The location of the AT/ATX mode select switch is shown in Figure 4-9 below.
Figure 4-9: AT/ATX Mode Select Switch Location
Page 58
Description
ATX Mode (Default)
AT Mode
gKINO-DMF SBC
Advertisement
Table of Contents
