Serial Port 2 Configuration - IEI Technology gKINO-DMF-421-R10 User Manual

gKINO-DMF SBC

5.3.4.1.2 Serial Port 2 Configuration


Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled

Enabled

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

IO=2F8h; IRQ=4

IO=3F8h; IRQ=3,
4,5,6,7,9,10,11,12

IO=3E8h; IRQ=3,
4,5,6,7,9,10,11,12

IO=2E8h; IRQ=3,
4,5,6,7,9,10,11,12

IO=2F0h; IRQ=3,
4,5,6,7,9,10,11,12

IO=2E0h; IRQ=3,
4,5,6,7,9,10,11,12
Disable the serial port
Enable the serial port
D
EFAULT
D Serial Port I/O port address is 2F8h and the
EFAULT
interrupt address is IRQ4
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Serial Port I/O port address is 2F0h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Serial Port I/O port address is 2E0h and the
interrupt address is IRQ3, 4, 5, 6, 7, 9, 10,
11, 12
Page 73