Chassis And Front Cover Reassembly - Motorola GP300 Series Basic Service Manual

Radio Reassembly — Detailed
7.7

Chassis and Front Cover Reassembly

Align the chassis assembly end-to-end with the front cover assembly.
1.
Insert the tails of the flex circuits into their respective connectors at the bottom of the front
2.
cover.
Push down the latches on the connectors to hold the flex circuits to the main board.
3.
Slide the volume potentiometer and frequency switch shafts into their respective holes in the
4.
front cover.
Push the chassis assembly completely into the top of the front cover until it settles in place.
5.
Be sure the O-ring is properly seated.
6.
Snap the bottom of the chassis into the front cover.
7.
Reassemble the knobs, dust cover, antenna, and battery.
8.
Radio Chassis
GP320/340/360/380
Figure 3-12 Fastening the Chassis
Radio Chassis
GP344/388
3-13