Chapter 1 Introduction; Mobile Radio Description; Dimensions - Motorola XPR 4300 Installation Manual

Table of Contents

Advertisement

Chapter 1 Introduction

This manual covers the installation procedures for XPR 4300/4350/4500/4550 mobile and
motorcycle radios with O5 control heads and accessories required to complete the radio system. The
radio system consists of a control head, radio, antenna, microphone, speaker, cabling, and
accessories.
1.1

Mobile Radio Description

1.1.1

Dimensions

Figure 1-1
and
4300/4350/4500/4550. The transceiver portion of a remote mount is sized similarly.
When installing the radio, make sure to plan the installation carefully and leave additional room in the
rear of the radio for cabling and accessory connections; in the front of the radio for access, controls,
and cabling; and to the sides of the radio so that you may access and install the trunnion wing
screws.
Figure 1-1. Front View of Dash Mount
Transceiver Trunnion
NOTE: The rear accessory connector adds 0.75 in. to the overall length.
Figure 1-2
show the basic dimensions of the dash mount transceiver trunnion XPR
8.5"
7.1"
9.6
9.1
Figure 1-2. Side View of Dash Mount Transceiver
Trunnion
2"
3.5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xpr 4350Xpr 4500Xpr 4550

Table of Contents