Specifications; Spectramax M2 And M2 Performance Specifications - Molecular Devices SpectraMax M2 User Manual

Hide thumbs Also See for SpectraMax M2:
Table of Contents

Advertisement

7.1.
SPECTRAMAX M2 AND M2

SPECIFICATIONS

Thermal specifications for microplates used in the SpectraMax M2 and SpectraMax M2
apply to flat-bottom microplates with isolated wells.
All other microplate specifications apply to standard 96-well polystyrene flat-bottom
microplates.
Performance specifications for cuvette readings apply only to aqueous solutions having
solute molal concentrations less than 0.4 M.
When pathlength compensation is applied to microplate absorbance measurements,
agreement with cuvette absorbance measurements for the same solution requires that the
solution volume in the microplate well is between 100 µL and 300 µL.
Technical specifications are subject to change without notice.
ABSORBANCE PHOTOMETRIC PERFORMANCE
Photometric accuracy/linearity,
Photometric precision (repeatability),
SpectraMax M2 & SpectraMax M2e Multi-mode Plate Readers User Guide — 0112-0102 Rev. D
7. Specifications
e
Wavelength range
Wavelength selection
Wavelength bandwidth
Wavelength accuracy
Wavelength repeatability
Photometric range
Photometric resolution
0–2.0 OD
0–2.0 OD
Stray light
PERFORMANCE
200–1000 nm
Monochromator tunable in 1-nm increments
≤ 4.0 nm full width half maximumëë
±2.0 nm across wavelength range
±0.2 nm
0.0 to 4.0 OD
0.001 OD
< ±1.0% and ±0.006 OD
< ±1.0% and ±0.003 OD
≤ 0.05% at 230 nm
e
45

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SpectraMax M2 and is the answer not in the manual?

This manual is also suitable for:

Spectramax m2e

Table of Contents

Save PDF