Configuring Ipv6; Configuring The Wan For An Ipv6 Network - Cisco RV215W Administration Manual

Configuring Networking

Configuring IPv6

Configuring IPv6
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 2—Cisco Confidential
Internet Protocol version 6 (IPv6) is a version of the Internet Protocol (IP) intended
to succeed Internet Protocol version 4 (IPv4). Configuring WAN properties for an
IPv6 network depends on the type of internet connection that you have.

Configuring the WAN for an IPv6 Network

You can configure the to be a DHCPv6 client of the ISP for this WAN or to use a
static IPv6 address provided by the ISP.
Setting the IP Mode
To configure IPv6 WAN settings on your , you must first set the IP mode to
LAN:IPv6, WAN:IPv6 or LAN:IPv4+IPv6, WAN:IPv4+IPv6.
See Configuring the IP Mode
Configuring DHCPv6
If your ISP provides you with a dynamically-assigned address, configure the to
use be a DHCPv6 client.
To configure the to be a DHCPv6 client:
Choose Networking > IPv6 > IPv6 WAN Configuration.
In the WAN Connection Type field, select Automatic Configuration-DHCPv6.
Click Save.
Configuring a Static WAN IP Address
If your ISP assigns you a fixed address to access the Internet, configure the to use
a static IPv6 address.
To configure the to use a static IPv6 address:
Choose Networking > IPv6 > IPv6 WAN Configuration.
In the WAN Connection Type field, select Static IPv6.
Enter this information:
for more information.
2
41