Mitsubishi Electric MDS-D-SPJ3 Specification Manual page 263

MITSUBISHI CNC
Appendix 6 Instruction Manual for Compliance with UL/c-UL
Appendix 6-2-5 Field Wiring Reference Table for Input and Output (Power Wiring)
Use the UL-approved Round Crimping Terminals to wire the input and output terminals of MDS-D/DH
Series. Crimp the terminals with the crimping tool recommended by the terminal manufacturer. Please
protect terminal ring by the insulation cover.
Following described crimping terminals and tools type are examples of Japan Solderless Terminal Mfg. Co.,
Ltd.
This wire size is each unit maximum rating. The selection method is indicated in each specification manual.
(See Manual: No. IB-1500003, 1500011, 1500158, 1500875 or 1500891)
(1) Power Supply Unit (MDS-D/DH-CV)
MDS-D-CV-
Unit Type
MDS-DH-CV-
TE2 (L+, L-)
Torque [lb in/ N m]
Terminal
TE3 (L11, L21)
Screw
Torque [lb in/ N m]
Size
TE1 (L1, L2, L3,
Torque [lb in/ N m]
TE2 (L+, L-)
MDS-D-CV-
Unit Type
MDS-DH-CV-
Wire Size (AWG)
Note 1
/Temp Rating
Crimping Terminals Type
Crimping Tools Type
TE3 (L11, L21)
Unit Type MDS-D/DH-CV-
Wire Size (AWG)
Note 1
/Temp Rating
Crimping Terminals Type
Crimping Tools Type
TE1 (L1, L2, L3,
MDS-D-CV-
Unit Type
MDS-DH-CV-
Wire Size (AWG)
Note 1
/Temp Rating
Crimping Terminals Type
Crimping Tools Type
MDS-D-CV-
Unit Type
MDS-DH-CV-
Wire Size (AWG)
Note 1
/Temp Rating
Crimping Terminals Type
Crimping Tools Type
(Note) 75 °C:Grade heat-resistant polyvinyl chloride insulated wires (HIV).
Use copper wire only.
Above listed wire are for use in the electric cabinet on machine or equipment.
Appendix 6 - 4
37 to 75
------
M6
35.4/4.0
M4
10.6/1.2
M4
)
10.6/1.2
--- 37
37, 75 ---
#14 #12
/75°C /75°C
R2-6 R5.5-6
YHT-2210 <-
)
37
37, 75
#14
/75°C
R2-4
YHT-2210
---
300
#6
/75°C
R14-8
YPT-60-21
110 to 185 300 to 450
37 to 185 300 to 750
M6 M6
<- <-
M4 M4
<- <-
M5 M8
17.7/2.0 53.1/6.0
75 110
110 185
#10 #8
/75°C /75°C
R5.5-6 R8-6
<- YPT-60-21
37 to 750
#14
/75°C
R2-4
YHT-2210
--- 75
110 ---
#12 #10
/75°C /75°C
R5.5-5 5.5-S4
<- <-
--- 300
370, 450 550
#4 #2
/75°C /75°C
R22-8 38-S8
<- <-
550
--- ---
M6 M10
<- 97.3/11.0
M4 ---
<- ---
M10 ---
97.3/11.0 ---
185 --- 300 to 550
300, 370 450 550, 750
#4 #3
Bus-bar.
/75°C /75°C
R22-6 R38-6 ---
<- YPT-60-21 ---
110 185
185 ---
#8 #6
/75°C /75°C
R8-5 R14-5
YPT-60-21 <-
370, 450 550
750 ---
#1/0 #3/0
/75°C /75°C
60-S8 80-10
<- YPT-150-1