Mitsubishi Electric MDS-D-SPJ3 Specification Manual page 265

MITSUBISHI CNC
Appendix 6 Instruction Manual for Compliance with UL/c-UL
(3) Servo Drive Unit (MDS-D/DH/DM-V1/V2/V3/D-SVJ3)
MDS-D-V1(#)-
MDS-DH-V1(#)-
Unit Type
MDS-D-SVJ3(#)-
TE2 (L+, L-)
Torque [lb in/ N m]
TE3 (L11, L21)
Torque [lb in/ N m]
Terminal
Screw
TE1 (L1, L2, L3,
Size
Torque [lb in/ N m]
CNP1 (L1,L2,L3,N,P1,P2) and
CNP3 (U,V,W))
Torque [lb in/ N m]
TE2 (L+, L-)
Wire size depends on the Power Supply Unit (MDS-D/DH-CV Series).
TE3 or CNP2 (L11, L21)
MDS-D/DH/DM-V1(#)/V2(#)/V3(#)-
Unit Type
MDS-D-SVJ3(#)-
Wire Size (AWG)
/Temp Rating
Crimping Terminals Type
Crimping Tools Type
TE1 (U, V, W,
MDS-D-V1(#)-
Unit Type
MDS-DH-V1(#)-
Wire Size (AWG)
/Temp Rating
MDS-D-V1(#)-
Unit Type
MDS-DH-V1(#)-
Wire Size (AWG)
/Temp Rating
Crimping Terminals Type
Crimping Tools Type
CNP1 (L1, L2, L3), CNP3 (U, V, W) and
Unit Type MDS-D-SVJ3(#)-
Wire Size (AWG)
/Temp Rating
(Note) 75 °C:Grade heat-resistant polyvinyl chloride insulated wires (HIV).
Use copper wire only.
Above listed wire are for use in the electric cabinet on machine or equipment.
(4) AC Reactor (D/DH-AL)
D-AL-
Type
DH-AL-
Terminal
L11, L12, L13, L21, L22, L23
Screw
Torque [lb in/ N m]
Size
Input/Output (L11, L12, L13, L21, L22, L23)
The wire connected with AC Reactor becomes same size as TE1 of the selected Power supply unit.
Appendix 6 - 6
)
Note 1
)
Note 1
Note 1
Note 1
160W, 320 320W
160, 160W 200
--- ---
M6 M6
35.4/4.0 <-
M4 M4
10.6/1.2 <-
M5 M8
17.7/2.0 53.1/6.0
--- ---
--- ---
10 to 320W
---
#14/75°C
R2-4
YHT-2210
20 to 80
10 to 80
#14
/75°C
--- 160W
160 160W
#10 #8
/75°C /75°C
R5.5-5 R8-5
YHT-2210 YPT-60-21
03(##) to 20(##)
#14
/60 or 75°C
7.5K, 11K 18.5K to 45K
7.5K, 11K 18.5K to 75K
M5 M6
17.7/2.0 35.4/4.0
--- ---
--- ---
10(##)
10 to 35(##)
20(##)
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
5.3/0.6 ---
---
03(##) to 35(##)
#14/60 or 75°C
---
---
160
80W
#10
/75°C
320 320W
--- 200
#6 #4
/75°C /75°C
R14-5 R22-8
<- <-
35(##)
#12
/60 or 75°C
55K
---
M10
97.3/11.0