Drive Unit Option - Mitsubishi Electric MDS-D-SPJ3 Specification Manual

5-4 Drive unit option

5-4-1 Optical communication repeater unit (FCU7-EX022)
When the distance of the optical communication cable between NC control unit and drive unit is over 30m
(M700V/M70V Series: maximum 30m, M700/M70/C70 Series: maximum 20m), the communication can be
performed by relaying the optical signal.
Using up to two units, relay of the total length of up to 90m (M700V/M70V Series: maximum 90m, M700/M70/C70
Series: maximum 60m) can be performed.
<Product features>
(a) When the distance of the optical communication cable between NC control unit and drive unit is over
30m, the communication can be performed by relaying the optical signal.
(b) The relay between NC control unit and drive unit can be performed for up to two channels.
(c) If the distance between NC control unit and drive unit is even within 30m, the cable can be divided by
the relay in transporting the machine.
(d) Same mounting dimension as the remote I/O unit (DX unit).
CAUTION
This unit can not be used between drive units.
(1) Specifications
Input voltage
Inrush current
24VDC input
Power consumption
Consumption current
Channel number
Optical interface
Connectable number
Ambient tempera-
ture
Ambient humidity
Environment
Vibration
Impact resistance
Atmosphere
Dimension
Dimension
Mounting method
Mass
Item
Operation
Storage
Operation
(long term)
Operation
(short term)
Storage
Operation
Transportation
Operation
MDS-D-SVJ3/SPJ3 Series Specifications Manual
24V±10% (21.6V to 26.4V)
35A
10W
0.4A
2 channels
Maximum 2
0°C to +55°C
-20°C to +60°C
+10%RH to +75%RH (with no dew condensation)
+10%RH to +95%RH
(with no dew condensation. Short term is within about one month.)
+10%RH to +75%RH (with no dew condensation)
4.9m/s
34.3m/s
29.4m/s
No corrosive gas, oil mist, or dust
(depth)135mm × (width)40mm × (height)168mm
Screw cramp with M5
0.42kg
5-4 Drive unit option
2
2
2
2 screw cramps
5 - 29