Adjustment Procedure Fh - sauter FH-M 1 kN Instruction Manual

9 Adjustment Procedure FH

1. Switch on the
instrument
2. Enter the
adjustment procedure
3. Instrument type
3a) (Back to the
normal mode ???)
4. Select instrument
type
5. Save the settings
6. Enter the
adjustment sequence
7. Choose the
adjustment weight
8. Save the
adjustment weight
9. Attach the weight
to the instrument
12
Press ON/OFF button
Directly after pressing ON/OFF,
press PEAK and PRINT
together for more times and
very short intervals until the
red light is on.
Press SET immediately, as
soon as the red light turns off
(If you are in the operation
mode again, the instrument has
to be shut off. Start again with
1. Eventually pressing the
buttons faster)
Please select the max. charge
(N) of the instrument with the
buttons▼▲
Press SET
Press MEMORY
Press UNIT and with▼▲
specify the calibration weight in
Newton (X kg * 9,81)
Press SET and UNIT
simultaneously
Attach the weight to the
instrument and hold steady,
then press ZERO
The green light will be on
The lower red light will be
on
The max. Newton value of
the instrument will be
displayed, can be
adjusted now respectively
The corresponding value
to the instrument appears
in the display
The red light on the right
side lights up
The weight is written in
the display
The instrument changes
to operation mode.
Adjustment procedure is
finished
FH-M-BA-e-1718