Product Info; Reset System; Usbcommunication; Measurement Technology - sauter TO-EE Instruction Manual

Multimode ultrasonic material thickness gauge

Table of Contents

5.19 Product info

Information on the device model, software version and serial number of the device is

displayed in windows as shown in the following figure.

Press the ,

, F1 or F3 key

If the device can no longer be operated or if it is necessary to restore factory settings,

you can reset the device.

The function "System Reset" is used to reset the system. When this function is

selected, all data stored in the instrument and the user calibration are deleted. The

device settings are reset to the default settings.

To reset the unit:

• activate the "System Reset" function. The dialog box on the right appears.

• Press the

cancel the reset.

NOTE: The effects of resetting the unit may be irreversible. No button should be

pressed during the reset process.

The device has a USB port in the upper left corner. The USB cable can be used to

connect the unit to a PC.

• Insert the mini-USB plug of the USB cable into the USB socket at the top of the

unit.

• Plug the other end of the USB cable into the USB port of the computer.

6.1

• Single point measuring method: the probe is placed at any point on the

workpiece. The instrument displays the thickness at the point where the probe

is placed.

to exit the dialog box.

or the F3 key to confirm the reset operation. Press the F1 key to

TO-BA-e-2020

Table of Contents