Adjustment Instruction Fk - sauter FK 10 Instruction Manual

Adjustment instruction FK

1. Stable external working conditions shall be provided.
A short warm-up phase of the device of approx. 1 minute is recommended for
stabilisation.
The FK can be switched on by pressing the "ON/OFF" key. The unit is in a
hanging position.
2. When the display shows "0", press the "UNIT" button and the "ZERO" button
simultaneously until "CAL" appears on the display.
3. After a few seconds the display will show the required calibration weight, e.g.
5.00kg for the FK 50 or 10.00kg for the FK 100.
FK-BA-e-2020 9