Adjustment Procedure Of Fk Force Gauges - sauter FK 50 Instruction Manual

• Inappropriate setting up or electric installation
• Overload of the measuring equipment
Inspection of measuring and testing equipment
Within the scope of quality assurance, the metrology features of the instrument and
any possible available adjusting weight must be checked at regular intervals. For this
purpose, the responsible user must define a suitable interval as well as the nature
and scope of this inspection. Information is available on SAUTER home page
(www.sauter.eu) concerning the monitoring of instrument test substances and the
test weights required for this. Test weights and instruments can be adjusted quickly
and reasonably priced in KERN's accredited DAkkS calibration laboratory (return to
national normal).
IMPORTANT
Observe the information in the operating instructions. Please read the instruction
manual carefully before the initial operation, even if you already have gained experi-
ence with SAUTER instruments.

8 Adjustment procedure of FK force gauges

Take care for stable working conditions
1. A short warming up time of approx. 1 minute is recommended for stabilisation.
Switch on the FK by pressing "ON/OFF" button. The instrument is held in vertical,
hanging position.
FK-BA-e-1614 7