Disassembly - JLG 1930ES Service Maintenance Manual

Disassembly

5. Insert a 4.8 mm (3/16") wide screwdriver blade between the mating seal and one of the red wedge lock tabs.
6. Pry open the wedge lock to the open position.
7. While rotating the wire back and forth over a half turn (1/4 turn in each direction), gently pull the wire until the contact is
removed.
3121166
SECTION 7 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
Figure 7-8. Connector Assembly (3 of 4)
Figure 7-9. Connector Assembly (4 of 4)
– JLG Lift – 7-7