Machine Configuration Programming Information - Zapi - 1001092456 - JLG 1930ES Service Maintenance Manual

SECTION 5 - JLG CONTROL SYSTEM

5.11 MACHINE CONFIGURATION PROGRAMMING INFORMATION - ZAPI - 1001092456

NOTE: When configuring an ES scissors machine, the machine configuration must be completed before any personality set-
tings can be changed. Changing the personality settings first and then changing the model number of the machine con-
figuration will cause the personality settings to return to default.
Shaded entries are not available for the selected Market.
Configuration
Setting
Digit
1
2
1
3
(Model #)
4
5
0
1
2 2
(Market *) 3
4
5
3 0 NO - Drive and lift up not prevented while tilted (Ground and Platform Mode).
(Tilt Cutout) 1 YES - Drive and lift up prevented while tilted (Ground and Platform Mode).
4 0 NO - Drive and lift up not prevented while elevated.
(Drive Cutout) 1 YES - Drive and lift up prevented while elevated.
0 DRIVE ONLY - Drive motion prevented while vehicle is charging.
5
DRIVE AND LIFT UP - Drive and lift up motions are prevented while vehicle is charg-
(Charger Interlock)
1 ing. Required for CE.
0 NOT INSTALLED - Vehicle alarm will function for Arm Guard (if enabled), Overload (if
LSS enabled, and as a horn.
6 1 DESCENT - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
(Ground Alarm) enabled, as a horn and during Lift Down motion.
2 MOTION - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
enabled, as a horn and during Drive and Lift motion.
0 NOT INSTALLED - Load Sensing System (LSS) is not fitted to the vehicle.
1 CUTOUT PLT - Load Sensing System (LSS) is fitted and Platform Controls are pre-
7 vented in the event of an Overload. Ground Controls remain functional. This is the
(Load) default setting for CE machines.
2 CUTOUT ALL - Load Sensing System (LSS) is fitted. Platform and GRound Controls
are prevented in the event of an overload.
8 0 FLOODED - Batteries are conventional lead-acid type.
(Battery) 1 AGM - Batteries are absorbed glass mat type.
9 0 NO - Vehicle is not fitted with a footswitch
(Footswitch) 1 YES - Vehicle is fitted with a footswitch
5-28
Table 5-6. Machine Configuration Programming Information
(Machines with ZAPI - 1001092456 Power Module Only)
Description
1930ES
2030ES
2630ES
2646ES
3246ES
ANSI USA
ANSI EXPORT
CSA
AUSTRALIA
JAPAN
– JLG Lift–
CE
* Market Default Setting
0 1 2 3 4
(Set to your applicable ES Model
1 through 5)
0 - (ANSI USA)
(Set to your applicable market)
1 1 1 0 1
0
0 0 0 0 0
2 2 2 0 2
0 1 0 1 0
0
0 0 0 0 0
1001115626-B
3121166
5
1
0
2
1
1