Table of Contents
Advertisement
Printer Does Not Pick Up or Feed the Paper/"No Paper" Error
Make sure paper is loaded in the specified rear tray or cassette.
Check 1
Paper Sources
When loading paper, consider the following.
Check 2
•
• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.
•
• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load
limit.
However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.
•
• Always load the paper in portrait orientation, regardless of the printing orientation.
• When you load the paper on the rear tray, place the print side facing UP and align the right and left paper
•
guides with the paper stack.
Paper Sources
• In the cassette, be sure to load only plain paper.
•
•
• When you load the paper on the cassette, place the print side facing DOWN and align the right/left/front
paper guides with the paper stack.
Paper Sources
Is paper too thick or curled?
Check 3
Unsupported Media Types
When loading envelopes, consider the following.
Check 4
•
• When printing on envelopes, see
printing.
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.
Make sure media type and paper size settings match with loaded paper.
Check 5
Make sure that there are not any foreign objects in the rear tray.
Check 6
If the paper tears in the rear tray, see
If a foreign object is inside the rear tray, remove it according to the following procedure.
Loading Envelopes in Rear
What to Do When Paper Is Jammed
451
Tray, and prepare the envelopes before
to remove it.
Advertisement
Table of Contents
