Mounting The Cooler Housing On The Cooler Frame; Preparing The Stand Alone Frame - Barco DP2K-36BLP User And Installation Manual

6. Physical installation stand alone cooler
Image 6-7
For more info about how to assemble the cooler housing, see "Assembling the housing", page 37.
6.3

Mounting the cooler housing on the cooler frame

What has to be done?
The cooler housing must be placed on the cooler frame and correctly fixed on it. For more info about how to mount the cooler
housing on the cooler frame, see "Mounting the housing on the frame", page 43.
6.4

Preparing the stand alone frame

Necessary tools
• Allen key 3 mm
• Nut driver
Necessary parts
• Stand alone frame
• 4 feet (floor mounting option)
Floor mounting
To install the standalone cooler in floor mounting mode follow this procedure:
1. Mount the 4 feet in such a way that the frame can stand stable. E.g. 2 on each short side or 2 on each long side.
Image 6-8
2. Push the threat axle through one of the holes and secure with a washer and a nut.
Continue with "Installing the brackets on the cooler housing", page 55.
54 R5906753 DPXK BLP SERIES 20/11/2017