6. Physical installation stand alone cooler
Image 6-19
3. Place the cover plate back on its location and drive in both fixation screws by hand.
Note: Please, don't use any tool! Only hand tighten these screws.
6.9
Cabling and tubing
Always connect the right cooler with right group of connectors at the backside of the projector. Connect the
left cooler with the left group of connectors at the backside of the projector.
Tubing
Tube 1
Tube 2
Tube 3
Tube 4
60
From projector connector plate
1f
1m
2f
2m
To cooler
1m
1f
2m
2f
R5906753 DPXK BLP SERIES 20/11/2017