User Maintenance - Stratasys Fortus 380mc Operation And Maintenance Manual

USER MAINTENANCE

Warning: The right and left upper and lower side panels, as well as the upper
and lower rear panels, should only be removed by an authorized service
representative.
Warning: Always wear proper heat protective clothing when working inside the
oven.
Maintenance tasks must be performed on a regular basis in order to maintain optimal system operation.
2 outlines the general maintenance schedule for the 450mc. Detailed instructions for each task make up the rest
of this chapter.
Table 1-3 lists part numbers for various replacement consumable items. A limited amount of replacement oven
bulbs, flicker/brush assemblies and purge ledges are included in the Welcome Kit. Once replacements are
depleted, you will need to order additional replacement items from Stratasys or your regional Stratasys office.
Use the part numbers listed in this table when ordering replacement parts
Table 1-2: Maintenance Schedule
Daily Weekly
X
X
X
X
Table 1-3: Replacement Consumables
Part Number
310-05000
511-00200
511-00700
Quarterly As Needed
X
X
Description
2-pack of oven bulbs
4-pack of flicker/brush assemblies
4-pack of purge ledges
Maintenance Task
Clean the Platen
Empty the Purge Bin
Vacuum the Build Envelope
Clean/Inspect the Tip Wipe Assembly
Clean the Tip Sensor Plunger
Replace Oven Bulbs
76
Table 1-