Set Up The Wireless Settings Wizard On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

1.1.4 Set Up the Wireless Settings Wizard on the ZyWALL/USG

In the Wireless Settings page, select Yes if you want the ZyWALL/USG to enable AP Controller
1
feature in your network; select No if you want to skip this setting. Click Next.
Figure 14 Installation Setup Wizard > Welcome > Internet Access > Internet Access Succeed >
Wireless Settings
Configure descriptive SSID name (1-32 characters) for the wireless LAN. Select Pre-Shared Key
2
(8-63 characters) to add security on this wireless network. Otherwise, select None to allow any
wireless client to associate this network without authentication.
Select Hidden SSID to hide the SSID from site tool scanning.
Select Enable Intra-BSS Traffic blocking if you want to prevent crossover traffic from within the
same wireless network. Wireless clients in that network can still access the wired network but
cannot communicate with each other.
For Built-in Wireless AP only, ZyWALL/USGs with W in the model name have a built-in AP. Select
an interface to bridge with the built-in AP wireless network. Devices connected to this interface will
then be in the same broadcast domain as devices in the AP wireless network.
Chapter 1 Set Up Your Network
ZyWALL/USG Series User's Guide
20