After restart your system. Type ZyWALL/USG's WAN IP into the browser, to display the login screen.
4
Enter User Name and Password to be the same as your ZyWALL/USG SSL VPN Selected User/
Group name and password (SSL_VPN_1_Users/zyx168 in this example). Click SSL VPN. Click
Allow if you see Internet Explorer Security warning.
Figure 613
5.7.3 Test the SSL VPN Tunnel
Go to ZyWALL/USG MONITOR > VPN Monitor > SSL and verify the tunnel Login Address,
1
Connected Time and the Inbound(Bytes)/Outbound(Bytes) traffic.
Figure 614 MONITOR > VPN Monitor > SSL > SSL_VPN_1_Users
Go to Windows 10 ZyWALL SecuExtender Status, you can check Connection Status, Connect
2
Time, Transmitted and Received traffic.
Figure 615 ZyWALL SecuExtender Status
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
254