Figure 284 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Phase 1 Setting)
Continue to Phase 2 Settings to select the desired Encapsulation, Encryption,
5
Authentication, and Perfect Forward Secrecy (PFS) settings.
Set Local Policy to be the IP address range of the network connected to the ZyWALL/USG and
Remote Policy to be the IP address range of the network connected to the Cisco. Click OK.
Figure 285 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Phase 2 Setting)
This screen provides a read-only summary of the VPN tunnel. Click Save.
6
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
127