ZyXEL Communications ZyWALL 110 Handbook page 173

Figure 399 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The Phase 1 rule settings appear in the VPN >
6
IPSec VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec
VPN > VPN Connection screen. Click Close to exit the wizard.
Figure 400 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings > Wizard Completed
Go to Network > Routing > Policy Route to add a Policy Route to allow traffic from
7
Spoke_Branch_B to Spoke_Branch_A.
Click Create new Object and set Address to be the local network behind the Spoke_Branch_A.
Select Source Address to be the local network behind the Spoke_Branch_B. Then, scroll down
the Destination Address list to choose the newly created Spoke_Branch_A_LOCAL address.
Click OK.
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
173