How To Deploy Ssl Vpn With Windows 10 Operating System; Set Up The Ssl Vpn Tunnel On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

5.7 How to Deploy SSL VPN with Windows 10 Operating
System
This is an example of using the ZyWALL/USG SSL VPN client software in Windows 10 operating
systems for secure connections to the network behind the ZyWALL/USG. When the VPN tunnel is
configured, users can securely access the network from a Windows 10 computer.
Figure 602 ZyWALL/USG SSL VPN with Windows 10
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using ZyWALL110 (Firmware Version: ZLD 4.13) and Windows
10 Pro (Version: 10.0.10240).

5.7.1 Set Up the SSL VPN Tunnel on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION > VPN > SSL VPN > Access Privilege to add an
1
Access Policy. Configure a Name for you to identify the SSL VPN configuration.
Figure 603 CONFIGURATION > VPN > SSL VPN > Access Privilege > Access Policy > Configuration
Go to Create new Object > User to add User Name (SSL_VPN_1_Users in this example) and
2
Password (4-24 characters, zyx168 in this example), click OK.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
249