ZyXEL Communications ZyWALL 110 Handbook page 131

Chapter 4 Create Site-to-Site VPN Tunnels
Figure 291 VPN > Site-to-site > Transform Sets
Go to VPN > Site-to-site > IPsec Policies and click Add. The new IPsec Policies dialog box
4
appears. Go to Basic Settings, create IPsec policy Description name and click On the IPsec
Policy Enable option.
Select Static IP as the Remote Type. Set Remote Address to be your ZyWALL/USG's WAN IP
Address (in the example, 172.101.30.73). Enter the same Pre-Shared Key as you created in
ZyWALL/USG. Then, set WAN Interface to the Internet-facing interface (found under Status >
WAN Interface).
Select Local network to be the IP address range of the network connected to the Cisco (found
under Status > LAN Interface) and Remote network to be the IP address range of the network
connected to the ZyWALL/USG (Address Object created in Step 1)
Figure 292 VPN > Site-to-site > IPsec Policies > Basic Settings
ZyWALL/USG Series User's Guide
131