Chapter 7 Manage Your Network Traffic
Figure 677 CONFIGURATION > BWM > BWM Global Settings > Enable BWM
7.5.3 Set Up the Bandwidth Management for P2P on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > BWM > Configuration > Add Policy, select
1
Enable and type P2P Any-to-WAN as the policy's Description.
Leave the Incoming Interface to any and select the Outgoing Interface to be WAN1. Select
Service Type to be the Application Object and select P2P from the list box.
Set the Guaranteed Bandwidth Inbound to 100 (kbps) and set Priority 5. Set the Maximum to
150 (kbps). Set the Guaranteed Bandwidth Outbound to 100 (kbps) and set Priority 5. Set the
Maximum to 150 (kbps). Click OK to return to the General screen.
Figure 678 CONFIGURATION > BWM > Configuration > Add Policy
Note: In Bandwidth Shaping, the highest priority is (1) the lowest priority is (7).
ZyWALL/USG Series User's Guide
289